Wet Chemical Kitchen Hood Inspection
All Brands, All South Florida Counties
Licensed wet chemical kitchen hood fire suppression inspection for commercial kitchens across Miami-Dade, Broward, Palm Beach, and Monroe County. Ansul, Amerex, Pyro-Chem, and all brands. Bi-annual NFPA 96 service.
What Is a Wet Chemical Kitchen Hood Fire Suppression System?
A wet chemical kitchen hood fire suppression system is the modern standard for commercial cooking fire protection. It uses a liquid potassium-based agent that suppresses cooking fires by cooling the burning grease and forming a foam blanket over the cooking surface to prevent reignition. Virtually every commercial kitchen with a fire suppression system installed after the early 1990s has a wet chemical system. The most common brands in South Florida are Ansul (R-102 and Piranha), Amerex (KP series), and Pyro-Chem (PCL and Kitchen Knight II). Florida Fire Solutions is a licensed fire protection company performing wet chemical kitchen hood inspections for all brands across all four South Florida counties.
Wet chemical systems replaced older dry chemical systems as the standard for commercial kitchen fire protection because they are more effective on the grease fires common in commercial cooking environments and because they cause less collateral damage to kitchen equipment and surfaces than dry chemical discharge. Under NFPA 96, all wet chemical kitchen hood suppression systems must be inspected every six months by a licensed fire protection contractor. The bi-annual inspection applies to every brand and model of wet chemical system and covers the same core scope regardless of manufacturer.
While the core inspection scope is consistent across wet chemical brands, the specific components used at service, including nozzle caps, pressure cartridges, fusible links, and agent tanks, are proprietary to each manufacturer and cannot be substituted across brands. A contractor who performs a wet chemical inspection must carry the correct manufacturer-specific parts for the system being serviced. We stock service components for all major wet chemical brands found in South Florida commercial kitchens and perform the full NFPA 96 inspection scope for every brand with the correct manufacturer-specific parts.
NFPA 96 requires all wet chemical kitchen hood systems to be inspected every six months by a licensed fire protection contractor. The brand name on your system does not change the inspection requirement or the timeline. Florida Fire Solutions holds license #FPC25-000017 and performs bi-annual wet chemical inspections for all brands across all four South Florida counties.
Schedule Your Inspection →License #FPC25-000017. Every inspection is performed by a licensed technician and documented with a written service report and certification tag for your fire marshal.
What Does the Bi-Annual Wet Chemical Kitchen Hood Inspection Include?
The NFPA 96 bi-annual inspection scope is consistent across all wet chemical brands. The components inspected, tested, and replaced are the same for Ansul, Amerex, Pyro-Chem, and other wet chemical systems, though the specific parts used must be manufacturer-specific.
- Agent storage tank inspected: tank exterior condition, mounting, and pressure gauge verified; agent level and tank integrity confirmed for all wet chemical brands
- Pressure cartridge inspected and weighed: cartridge compared to manufacturer specification; replaced with the correct brand-specific cartridge if outside acceptable range
- All discharge nozzles inspected: nozzle type confirmed as correct for the cooking equipment at each position; nozzle caps replaced with brand-specific caps at every inspection
- Fusible or thermal links replaced: all detection links on the cooking line replaced with new brand-rated links at every bi-annual service; these are single-use components and cannot be reused
- Manual pull station tested: cable and pull mechanism tested for correct operation and properly reset
- Gas shutoff valve tested: automatic gas valve functionally tested to confirm it closes immediately on system activation; critical life-safety test at every inspection
- Electrical interlock tested where installed: cooking equipment power shutoff confirmed to activate on system discharge
- Hood and cooking equipment compatibility verified: nozzle coverage confirmed as appropriate for current cooking equipment configuration; changes noted if equipment has been added or relocated
- Written service report completed: Commercial Cooking System Service and Inspection Report produced; certification tag affixed to system with current date; copy left on-site
How Do the Major Wet Chemical Kitchen Hood Brands Compare?
The major wet chemical brands in South Florida all meet NFPA 96 requirements and perform the same core fire suppression function. The differences are in application range, component design, and the era of the South Florida kitchen inventory where each is most common.
Wet Chemical Kitchen Hood System Brand Comparison for South Florida
South Florida commercial kitchens. All brands require bi-annual NFPA 96 inspection. Components are brand-specific and not interchangeable across manufacturers.
| Brand / System | Most Common In | Agent Type | Parts Interchangeable? |
|---|---|---|---|
| Ansul R-102 | Most South Florida commercial kitchens; dominant brand across all property types | ANSULEX Low pH wet chemical | No; R-102 specific nozzle caps, cartridges, and fusible links required |
| Ansul Piranha | High-volume QSR, fryer-heavy operations; newer installations | PIRANHA wet chemical agent | No; Piranha components differ from R-102; system-specific parts required |
| Amerex KP series | Restaurants, hotel kitchens, institutional food service; second-most common brand | Potassium acetate wet chemical | No; Amerex-specific nozzle caps, cartridges, and links required |
| Pyro-Chem PCL / Kitchen Knight II | Older kitchen inventory from mid-1990s through mid-2000s | Wet chemical (Pyro-Chem formulation) | No; Pyro-Chem specific parts required; aging systems may need condition assessment |
| Kidde Kitchen Mist | Less common; found in some smaller commercial kitchen installations | Wet chemical | No; Kidde-specific components required |
| Other listed wet chemical systems | Varies by installation era and contractor preference | Wet chemical (formulation varies by brand) | No; all wet chemical brands use proprietary components |
Florida Fire Solutions services all major wet chemical kitchen hood brands with the correct manufacturer-specific components. We confirm the system brand before the inspection visit to ensure correct parts are on hand.
Wet Chemical Kitchen Hood Inspection Across South Florida
Florida Fire Solutions performs wet chemical kitchen hood inspection for commercial kitchens across all four South Florida counties. Every inspection is documented with a written service report and certification tag for the fire marshal.
Miami-Dade County's commercial kitchen inventory is predominantly wet chemical, with Ansul R-102 as the dominant brand followed by Amerex and Pyro-Chem in older properties. The Miami-Dade Fire Rescue authority verifies current kitchen hood certification tags during routine food service inspections across all property types. We serve commercial kitchens throughout Miami-Dade with correct brand-specific wet chemical inspection and documentation.
View Miami-Dade coverageBroward County's restaurant and hotel kitchen inventory is nearly entirely wet chemical systems across all property types from independent restaurants through hotel banquet kitchens and institutional food service operations. Broward County fire marshals actively enforce the bi-annual inspection requirement. We perform wet chemical inspections for all brands across all Broward County communities.
View Broward coveragePalm Beach County commercial kitchens are predominantly wet chemical systems, with a mix of Ansul, Amerex, and Pyro-Chem installations reflecting the county's range of kitchen build eras. The Palm Beach County Fire Rescue authority enforces NFPA 96 compliance for all commercial kitchen operations. We serve Palm Beach County with wet chemical inspection for all brands.
View Palm Beach coverageMonroe County commercial kitchens throughout the Florida Keys are virtually all wet chemical systems, with the coastal salt air and humidity environment making regular bi-annual inspection especially important to ensure nozzles remain clear and components function correctly between visits. We serve Monroe County commercial kitchens with wet chemical inspection for all brands from a licensed fire protection company.
View Monroe County coverageWhy Florida Fire Solutions for Wet Chemical Kitchen Hood Inspections
Servicing wet chemical systems correctly requires carrying the right brand-specific components for the system being inspected. A van stocked only with Ansul parts cannot properly service an Amerex or Pyro-Chem system. We stock service components for all major wet chemical brands.
Frequently Asked Questions: Wet Chemical Kitchen Hood Inspection
Wet chemical systems use a liquid potassium-based agent designed specifically for commercial cooking fires involving grease and oil. Dry chemical systems use a powder agent that is effective on some fire types but less targeted for grease fires and more damaging to kitchen equipment. NFPA 96 and most current building codes require wet chemical systems for commercial cooking operations. Dry chemical systems in older kitchens that have not been upgraded may need to be evaluated for compliance with current equipment configurations.
Check the data plate on the agent storage tank or the system control head. The manufacturer name and model number are on the data plate. Common brands you will see are Ansul, Amerex, and Pyro-Chem. If the data plate is missing or unreadable, a licensed inspector can identify the brand from the system's physical configuration.
The core NFPA 96 inspection scope is the same for all wet chemical brands: nozzle cap replacement, fusible link replacement, gas shutoff test, cartridge inspection, pull station test, and written documentation. The difference is in the specific components used at service, which must be manufacturer-specific for each brand. The inspection procedure follows the brand-specific installation and maintenance manual alongside the NFPA 96 scope.
Yes. After a wet chemical system discharges in a fire event or accidental activation, the agent tank must be recharged and the expended cartridge replaced before the system can be returned to service. The distribution nozzles and detection links also need to be inspected and replaced as part of the post-discharge service. Florida Fire Solutions performs wet chemical system recharge and restoration across all four South Florida counties.
Wet chemical systems are listed for specific cooking equipment types and configurations. If cooking equipment has been added, replaced, or repositioned since the system was installed, the existing nozzle coverage may not be correct for the new equipment. We assess cooking equipment compatibility during every inspection and document any coverage concerns in the service report. If a system modification or replacement is needed, we can advise on the appropriate path.
Schedule Your Wet Chemical Kitchen Hood Inspection
Call us or send a message. We confirm your system brand, bring the correct manufacturer-specific components, perform the full NFPA 96 bi-annual inspection, and deliver the written report and certification tag. Licensed contractor. All four South Florida counties.
Reviewed by the Florida Fire Solutions Team. Licensed fire protection contractor, License #FPC25-000017. Serving Miami-Dade, Broward, Palm Beach, and Monroe County. All content reflects current NFPA 96 requirements, Florida Fire Prevention Code standards, and direct field experience inspecting and servicing all major wet chemical kitchen hood fire suppression system brands in commercial kitchens across South Florida.
Last updated: May 2025